Description
CLEAN EXAMPLE OFF A MODERN SEDGWICK TESH 3 HEAD TENONERS,
COMPLETE WITH MAGNETIC MOTOR BRAKING & NUMERICAL READOUTS TO ALL HEADS
MACHINE SPECIFICATION
- TIMBER CAPACITY – 130MM X 310MM
- TIMBER CAPACITY WITH FENCE @ 45 – 130MM X 250MM
- MAXIMUM LENGTH OF TENON – 155MM
- MAXIMUM LENGTH OF TENON IN 2 PASSES – 205MM
- MAIN CUTTERHEADS – 2 X 175MM X 60MM
- VERTICAL ADJUSTMENT OF BOTTOM CUTTER BLOCK – 0-60MM
- VERTICAL ADJUSTMENT OF TOP CUTTER BLOCK – 0-120MM
- HORIZONTIAL ADJUSTMENT OF TOP CUTTER BLOCK – +/- 32MM
- SCRIBING HEAD – 5 1/2 HP 30MM SHAFT
- SCRIBING HEAD VERTICAL MOVEMENT – 0-95MM
- SCRIBING HEAD HORIZONTAL MOVEMENT – 0-30MM
- MAXIMUM DIAMETER
- TABLE SIZE – 800MM X 310MM
- TABLE HEIGHT – 860MM
- MAIN CUTTERHEADS – 2 X 175MM X 60MM
- DUST EXTRACTION OUTLETS – 3 X 150MM
The Sedgwick TESH 3 Tenoner, Taking only minutes to set up, the Sedgwick TESH is easy to use and accurate in operation. Work is positioned on the rolling table against an end stop and a fence, and is secured by a cam action clamp. Its end is then passed between two vertically mounted cutterheads which machine the top and bottom cheeks of the tenon. The tenon width is set by raising or lowering the top motor, and its position on the timber by raising/lowering the two motors in tandem. Variations in shoulder length are set using the rule on the end stop, and staggered tenons are achieved by simple handwheel adjustment of the top motor, again reading from a rule. 2 x 3hp Tenon heads 1 x 5hp scribe head
